|
Diode Laser Output Power
|
20W
|
|
Laser Focus
|
0.08x0.1mm
|
|
Laser Wavelength
|
455±5nm
|
|
Focusing Method
|
fixed focus column + sliding device
|
|
Laser Protection Cover
|
Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles
|
|
Engraving Accuracy
|
0.005mm
|
|
Engraving Area Size
|
the standard version is 410*400mm, which can be expanded to 935x400mm or 935x905mm
|
|
Machine Power
|
60W
|
|
Engraving Area After Installing the Limit Switch
|
370x363mm
|
|
Air Pump
|
mainboard-controlled air pump
|
|
Air Pump Voltage
|
24V
|
|
Air Pump Flow
|
30L/min
|
|
Air Hose Inner Diameter
|
7.5mm
|
|
Motherboard
|
32-bit air-assisted motherboard, reserve Bluetooth, SD card offline printing function.
|
|
Engraving Material
|
all kinds of wood (including walnut, cherry, and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone
Cutting Material: all kinds of wood (including walnut, cherry, and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards
|
|
Operating Software
|
LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system
|
|
Supported File Formats
|
NC, BMP, JPG, PNG, DXF, and other image formats
|
|
Data Transmission Method
|
USB connection or Bluetooth wireless connection
|
